GroundControl, the quality documentation platform for aerospace and defense suppliers, today announced support for Production Part Approval Process (PPAP) packages, as described for aerospace in AS9145. Suppliers can now build a PPAP file in the same place they already create AS9102 First Article Inspection reports and eCerts, then export it directly into the workbook their customer requires.
A PPAP package asks a supplier to show that their process can make a part to print consistently. Most of what goes into one already exists in the shop as the ballooned drawing, the FAIR, material and special process certs, and dimensional results. Quality teams usually rebuild that information by hand in each customer's spreadsheet template, retyping the same dimensions they entered for the first article.
GroundControl fills the PPAP from the records it already holds. The ballooned drawing, AS9102 Forms 1 through 3, and the certs attached to Form 2 carry over into the package automatically. Process steps are entered once and populate the process flow diagram, PFMEA and control plan together. Gage R&R studies and Ppk are calculated in the app, and the export generates the control charts and histograms the customer's template asks for. Gage R&R reporting can be set for spread, basis, and AIAG pass bands, and the exported sheets use the customer workbook's own calculations.

The finished package is written into the customer's own Excel workbook instead of a GroundControl format, so it reaches the customer's supplier quality team in the layout they already review. GroundControl supports multiple prime-specific PPAP workbooks today and adds new templates as customers bring them.
For defense programs that handle CUI, PPAP can be enabled on the GroundControl government-cloud deployment for AS9102/FAI, PO Review, and PPAP. That deployment has achieved FedRAMP Moderate Equivalency following an independent 3PAO assessment and may store, process, and transmit CUI under DoD equivalency guidance. PPAP is not on by default there, and enabling it does not change the status of other GroundControl environments.
Availability
PPAP support is available now as an add-on for GroundControl customers. Existing customers can turn it on after meeting with the team to discuss their individual needs. Book a demo.
About GroundControl
GroundControl builds quality and compliance software for aerospace and defense suppliers. Its platform generates AS9102 First Article Inspection reports and PPAP packages; lets OEMs review incoming supplier FAIRs in one place; and checks purchase orders and contracts for flowdown requirements. Learn more at gndctl.com.



